White diet is not necessary during dental bleaching treatment: A systematic review and network meta-analysis of clinical studies *** Effect of CAD-CAM block thickness and translucency on the polymerization of luting materials *** Effect of Repeated Firings on Color Stability of Zirconia- Reinforced Lithium Silicate and Lithium Disilicate Ceramics *** A novel approach for the replacement of accuracy and precision measurements with the visual instrument agreement scale (VIAS) in evaluating the performance of four intraoral scanners and one shade measurement device *** Flexural Strength of Modern CAD/CAM Restoratives After Artificial Aging *** Investigation of Changes in Tooth Colour After the Use of Different Aligners *** Masking ability of computer-aided design and manufacturing bleach shade ceramics with different thicknesses on titanium abutments *** Effect of staining solutions on color and translucency stability of resin-composite computer-aided design and computer-aided manufacturing blocks *** A Comprehensive Review of Techniques for Enhancing Zirconia Bond Strength: Current Approaches and Emerging Innovations *** Bleaching Gels and Light-Emitting Diodes: Comparison of Tooth Color Change *** Bonding effectiveness of multi-step adhesive resin cements to CAD/CAM blocks: impact of thermal cycling and surface treatment methods *** Color Stability of PMMA Resins for Complete Denture Produced by CAD/CAM and 3D Printing Technologies: An In Vitro Study *** Mechanical, Adhesive and Surface Properties of a Zirconia-Reinforced Lithium Silicate CAD/CAM Ceramic Exposed to Different Etching Protocols *** The Effect of Erosive Media on the Mechanical Properties of CAD/CAM Composite Materials *** Evaluation of optical and mechanical properties of crown materials produced by 3D printing *** Survival and Complication Rates of Polymer-Infiltrated Ceramic-Network Single- Tooth Restorations with an Observation Period of up to Three Years *** Is It Possible for Single-shade Composites to Mimic the Color, Lightness, Chroma, and Hue of Other Single-shade Composites? An In Vitro Study *** A Comparison of the Shear Bond Strength between a Luting Composite Resin and Both Machinable and Printable Ceramic-Glass Polymer Materials *** Hybrid Ceramics Cementation Protocols: Scope Review *** Effectiveness of Papain-Based Organic Dentifrices Versus Commercial Whitening Dentifrice on Tea-Induced Tooth Stains: An In Vitro Study *** Self-Etching Ceramic Primer Affects Surface Topography and Roughness of Two Zirconia-Reinforced Lithium Silicate Ceramics *** Effect of thermomechanical aging on marginal fit of three CAD-CAM restorative materials: An in vitro study *** Effect of computer-aided design/computer-aided manufacturing bleach shade ceramic thickness on its light transmittance and microhardness of light-cured resin cement *** Effect of Common Staining Beverages on Color Stability of Polymer-infiltrated Ceramics and Extra Translucent Zirconia: An <em>In Vitro</em> Study *** A machine learning based approach to standardizing tooth color and shade recommendations *** Effect of preparation design on fracture resistance of molars restored with occlusal veneers of different CAD-CAM materials: an in vitro study *** Assessing the Aesthetic Performance of CAD/CAM Provisional Restorative Materials: A Spectrophotometric Analysis *** Effect of simulated intraoral adjustment on the color and translucency of gradient multilayered monolithic zirconia *** INFLUENCE OF ABUTMENT MATERIAL, CEMENT THICKNESS, AND CROWN TYPE ON THE FINAL COLOR OF IMPLANT-SUPPORTED RESTORATIONS *** Exploring the optical behavior and relative translucency parameter of CAD-CAM resin-based composites, polymer-infiltrated ceramic network, and feldspar porcelain *** Repeatability of different mobile phone applications for color measurement in dentistry *** Assessing the Color Stability of Polymethyl Methacrylate (PMMA) Dental Restorations Polished With a Novel Polishing Agent Derived From Pulverized Old Alginate Impressions *** Accuracy of Color Determination by Intraoral Scanners in Bleached and Unbleached Teeth: A Clinical Study *** Fracture resistance of CAD/CAM tooth-colored versus cast metal post-and-core restorations in root filled teeth: An in vitro study *** Evaluation of Colour Changes in Nanocomposite-Based Bulk-Fill and Universal Composite Using Different Polishing Systems *** Effect of machining damage on the surface roughness and flexural strength of CAD-CAM materials *** Three-Dimensional Optical Study on the Effects of Microwave Glazing on Surface Roughness of Zirconia-Reinforced Glass Ceramic *** Effect of resin cement viscosities and surface roughness on shear bond strength of conditioned polymer infiltrated ceramic network *** Comparison of the Accuracy and Reliability of Instrumental Shade Selection Devices and Visual Shade Selection: An in Vitro Study *** Effect of elastic gradients on the fracture resistance of tri-layer restorative systems *** The effect of hydrogen peroxide and subsequent resveratrol application to CAD-CAM blocks on the cell viability of fibroblasts *** Effect of Successive At-home Bleaching Sessions on the Surface Properties, Biaxial Flexural Strength, and Reliability of CAD-CAM Monolithic Materials *** Effects of two dentifrices on the surface properties and staining susceptibility of polymer-based materials *** Flowable composite as an alternative to adhesive resin cement in bonding hybrid CAD/CAM materials: in-vitro study of micro-shear bond strength *** Effect of hydrogen peroxide versus charcoal-based whitening mouthwashes on color, surface roughness, and color stability of enamel *** Do all ceramic and composite CAD-CAM materials exhibit equal bonding properties to implant Ti-base materials? An Interfacial Fracture Toughness Study *** Translucency and colour masking ability of hybrid CAD/CAM materials with different thicknesses: in vitro study *** Remineralization of post-orthodontic white spot lesions with a fluoride varnish and a self-assembling P 11 - 4 peptides: a prospective in-vivo-study *** Surface roughness, wear, and abrasiveness of printed and milled occlusal veneers after thermomechanical aging *** Interdisciplinary Delphi study by PROSEC North America: Recommendations on single indirect restorations made from ceramic and nonmetallic biomaterials for posterior teeth *** No-prep dentistry using the Simple Orthodontic Extrusion (SOE) technique to create occlusal space. Illustration in tooth wear and resin-bonded bridges *** Effect of polishing and bleaching on color, whiteness, and translucency of CAD/CAM monolithic materials *** The effect of different materials and cavity designs on fracture resistance of ceramic partial coverage *** An Approach to Improve Specimen Processing for the Flexural Strength Testing of Zirconia *** Safety and Effectiveness of a Novel Color Corrector Serum for Causing Temporary Changes to Tooth Shade: A Randomized Controlled Clinical Study *** Effects of Printing Angle and Post-Curing Time on the Color and Translucency of 3D-Printed Temporary Restoration *** Assessment of Tooth Shade Measurement Precision and Consistency with Digital Photography Calibration System *** Determination of the Color Change of Various Esthetic Monolithic Monochromatic Computer-Aided Design/Computer-Aided Manufacturing Materials *** Effect of simulated gastric acid exposure on the hardness, topographic, and colorimetric properties of machinable and pressable zirconia-reinforced lithium silicate glass-ceramics *** Instrumental and Visual Evaluation of the Chameleon Effect of Single-shaded Composite Resins *** Effect of Er,Cr: YSGG laser debonding treatment on the optical properties and surface roughness of ceramic laminate veneers: An in vitro study *** Different surface treatments on recently introduced CAD-CAM resin-modified ceramics: Implications on bond strength *** An In Vitro Study of Retention and Marginal Adaptation of Endocrowns With Different Intracoronal Depths *** Effects of Different Concentrations of Carbamide Peroxide on Color, Surface Roughness, and Hardness of CAD/CAM Dental Ceramics *** Effect of conventional cigarette smoking and recent heated tobacco products on CAD/CAM restorative materials *** Effect of primer compositions on the bond strength of resin cement to ceramic materials *** Effect of thickness on the translucency of machinable and printable ceramic-glass polymer materials *** Effect of different instrumental techniques and clinical experience on shade matching *** Effect of surface treatment strategies on bond strength of additively and subtractively manufactured hybrid materials for permanent crowns *** Bacterial adhesion and surface properties of computer-aided design-computer-aided manufacturing restorative materials *** Chemical etching of CAD-CAM glass-ceramic-based materials using fluoride solutions for bonding pretreatment *** Improving electron transportation and operational lifetime of full color organic light emitting diodes through a "weak hydrogen bonding cage" structure *** A digital guide device to facilitate CAD-CAM veneer cementation for mandibular incisors: A dental technique *** Manufacturing Accuracy, Intaglio Surface Adaptation, and Survival of Additively and Subtractively Manufactured Definitive Resin Crowns After Cyclic Loading: An In Vitro Study *** Effect of Acidic Media on Surface Topography and Color Stability of Two Different Glass Ceramics *** Intraoral wear of PICN CAD-CAM composite restorations used in severe tooth wear treatment: 5-year results of a prospective clinical study using 3D profilometry *** Dental restorative materials and halitosis: a preliminary<em>in-vitro</em>study *** Investigation of Mechanical Properties of Polymer-Infiltrated Tetrapodal Zinc Oxide in Different Variants *** Microstructural investigation of hybrid CAD/CAM restorative dental materials by micro-CT and SEM *** Evaluation of the Color Stability of Three Resin-Ceramic Materials Using a Spectrophotometer and a Digital Photography Software *** Effect of low power Er:YAG laser irradiation of CAD-CAM resin-based composites on resin bonding *** Fracture resistance and failure mode of three esthetic CAD-CAM post and core restorations *** Three-axis load analysis of high-speed handpiece on dental training teeth and computer-aided design/computer-aided manufacturing blocks *** Bleaching efficacy of in-office dental bleaching with different application protocols: a single-blind randomized controlled trial *** Color Stability of Bioactive Restorative Material vs Nanohybrid Resin Composite: An <em>In Vitro</em> Study *** Evaluation of bond strength between zirconia milled ceramic material and veneered dental porcelain *** Effects of different antiviral mouthwashes on the surface roughness, hardness, and color stability of composite CAD/CAM materials *** Color and Chemical Stability of 3D-Printed and Thermoformed Polyurethane-Based Aligners *** Clinical Comparative Study of Shade Measurement Using Two Methods: Dental Guides and Spectrophotometry *** A comparative evaluation of the variations on the shades of pressable ceramic system with the layering technique after different number of firing cycles: An in vitro study *** Color match of single-shade restorations after professional dental bleaching: An <em>in vitro</em> study *** A Comparative Study to Check the Accuracy of Tooth Shade Selection With Standardized Digital Photographs and a Spectrophotometer *** Comparison of the shear bond strengths of two different polyetheretherketone (PEEK) framework materials and CAD-CAM veneer materials *** Long-Term Bonding Efficacy of CAD/CAM Hybrid Restorative Materials and Universal Adhesives *** Effect of Two Different Intraoral Polishing Systems on Surface Roughness, Color Stability, and Bacterial Accumulation of Zirconia-Reinforced Lithium Silicate Ceramic *** Comparative Study of the Influence of Heat Treatment on Fracture Resistance of Different Ceramic Materials Used for CAD/CAM Systems *** A Comparative Study of Shade-Matching Reproducibility Using an Intraoral Scanner and a Spectrophotometer *** Effect of Thermo-mechanical Cycling on Fracture Resistance of Different CAD/CAM Crowns: An <em>In Vitro</em> Study *** INFLUENCE OF AGING, BEVERAGES, AND MOUTH WASH SOLUTIONS ON THE MICROSTRUCTURAL AND COLOR STABILITY OF DIFFERENT DENTAL CERAMICS: AN IN VITRO STUDY *** Effect of Hydrothermal Aging on the Flexural Strength and Microhardness of Materials Used for Additive or Subtractive Manufacturing of Definitive Restorations *** 